main_k66.c

/*
 * Kinetis K66 board support for the bootloader.
 *
 */

#include "kinetis.h"
#include "gpio/fsl_gpio.h"
#include "port/fsl_port.h"
#include "smc/smc.h"
#include "flash/fsl_flash.h"

#include "hw_config.h"

#include <stdint.h>
#include <stdbool.h>
#include <stdlib.h>

#include "bl.h"
#include "uart.h"

#define BOOTLOADER_RESERVATION_SIZE	(24 * 1024)
#define FIRST_FLASH_SECTOR_TO_ERASE  (BOARD_FIRST_FLASH_SECTOR_TO_ERASE + (BOOTLOADER_RESERVATION_SIZE/FLASH_SECTOR_SIZE))

#define BOARD_RESETCLOCKRUN_CORE_CLOCK             20971520U  /*!< Core clock frequency: 20971520Hz */

#define MCG_IRCLK_DISABLE                                 0U  /*!< MCGIRCLK disabled */
#define MCG_PLL_DISABLE                                   0U  /*!< MCGPLLCLK disabled */
#define OSC_CAP0P                                         0U  /*!< Oscillator 0pF capacitor load */
#define OSC_ER_CLK_DISABLE                                0U  /*!< Disable external reference clock */
#define SIM_OSC32KSEL_OSC32KCLK_CLK                       0U  /*!< OSC32KSEL select: OSC32KCLK clock */
#define SIM_PLLFLLSEL_MCGFLLCLK_CLK                       0U  /*!< PLLFLL select: MCGFLLCLK clock */

// SIM_SDID
#define KINETIS_UNKNOWN	0
#define KINETIS_K66

#define PIN_MASK           0x0000000f
#define PIN_SHIFTS         0
#define FAM_MASK           0x00000070
#define FAM_SHIFTS         4
#define DIEID_MASK         0x00000f80
#define DIE_SHIFTS         7
#define REVID_MASK         0x0000f000
#define REVID_SHIFTS       12
#define RESID_MASK         0x000f0000
#define RESID_SHIFTS       16
#define SERIESID_MASK      0x00f00000
#define SERIESID_SHIFTS    20
#define SUBFAMID_MASK      0x0f000000
#define SUBFAMID_SHIFTS    24
#define FAMID_MASK         0xf0000000
#define FAMID_SHIFTS       28

#define APP_SIZE_MAX			(BOARD_FLASH_SIZE - (BOOTLOADER_RESERVATION_SIZE + APP_RESERVATION_SIZE))

/* context passed to cinit */
#if INTERFACE_USART
# define BOARD_INTERFACE_CONFIG_USART	(void *)BOARD_USART
#endif
#if INTERFACE_USB
# define BOARD_INTERFACE_CONFIG_USB  	NULL
#endif

flash_config_t s_flashDriver;                       //!< Flash driver instance.
static uint32_t s_flashRunCommand[kFLASH_ExecuteInRamFunctionMaxSizeInWords];
static uint32_t s_flashCacheClearCommand[kFLASH_ExecuteInRamFunctionMaxSizeInWords];
static flash_execute_in_ram_function_config_t s_flashExecuteInRamFunctionInfo = {
	.activeFunctionCount = 0,
	.flashRunCommand = s_flashRunCommand,
	.flashCacheClearCommand = s_flashCacheClearCommand,
};


/* board definition */
struct boardinfo board_info = {
	.board_type	= BOARD_TYPE,
	.board_rev	= 0,
	.fw_size	= 0,
	.systick_mhz	= 120,
};

static void board_init(void);

#define BOOT_RTC_SIGNATURE          0xb007b007
#define POWER_DOWN_RTC_SIGNATURE    0xdeaddead // Written by app fw to not re-power on.
#define BOOT_RTC_REG                0

static uint32_t
board_get_rtc_signature()
{
	return RFVBAT->REG[BOOT_RTC_REG];
}

static void
board_set_rtc_signature(uint32_t sig)
{
	RFVBAT->REG[BOOT_RTC_REG] = sig;
}


static bool
board_test_force_pin()
{
	return false;
}
#if INTERFACE_USART == 1
static bool
board_test_usart_receiving_break()
{
#if !defined(SERIAL_BREAK_DETECT_DISABLED)
	/* (re)start the SysTick timer system */
	systick_interrupt_disable(); // Kill the interrupt if it is still active
	systick_counter_disable(); // Stop the timer
	systick_set_clocksource(SYSTIC_CLKSOURCE_AHB);

	/* Set the timer period to be half the bit rate
	 *
	 * Baud rate = 115200, therefore bit period = 8.68us
	 * Half the bit rate = 4.34us
	 * Set period to 4.34 microseconds (timer_period = timer_tick / timer_reset_frequency = 168MHz / (1/4.34us) = 729.12 ~= 729)
	 */
	systick_set_reload(729);  /* 4.3us tick, magic number */
	systick_counter_enable(); // Start the timer

	uint8_t cnt_consecutive_low = 0;
	uint8_t cnt = 0;

	/* Loop for 3 transmission byte cycles and count the low and high bits. Sampled at a rate to be able to count each bit twice.
	 *
	 * One transmission byte is 10 bits (8 bytes of data + 1 start bit + 1 stop bit)
	 * We sample at every half bit time, therefore 20 samples per transmission byte,
	 * therefore 60 samples for 3 transmission bytes
	 */
	while (cnt < 60) {
		// Only read pin when SysTick timer is true
		if (systick_get_countflag() == 1) {
			if (GPIO_ReadPinInput(BOARD_PORT_USART, BOARD_PIN_RX) == 0) {
				cnt_consecutive_low++;	// Increment the consecutive low counter

			} else {
				cnt_consecutive_low = 0; // Reset the consecutive low counter
			}

			cnt++;
		}

		// If 9 consecutive low bits were received break out of the loop
		if (cnt_consecutive_low >= 18) {
			break;
		}

	}

	systick_counter_disable(); // Stop the timer

	/*
	 * If a break is detected, return true, else false
	 *
	 * Break is detected if line was low for 9 consecutive bits.
	 */
	if (cnt_consecutive_low >= 18) {
		return true;
	}

#endif // !defined(SERIAL_BREAK_DETECT_DISABLED)

	return false;
}
#endif

static void
board_init(void)
{
	exit_vlpr();

	/* fix up the max firmware size, we have to read memory to get this */
	board_info.fw_size = APP_SIZE_MAX;

#if defined(BOARD_POWER_PIN_OUT)

	/* Configure the Power pins */

	/*  Sets the ports clocking */

	CLOCK_EnableClock(KINETIS_CLOCK_PORT(BOARD_POWER_PORT));

	port_pin_config_t power_port_config = {
		.pullSelect           = kPORT_PullDown,
		.slewRate             = kPORT_FastSlewRate,
		.passiveFilterEnable  = kPORT_PassiveFilterDisable,
		.openDrainEnable      = kPORT_OpenDrainDisable,
		.driveStrength        = kPORT_LowDriveStrength,
		.mux                  = kPORT_MuxAsGpio,
		.lockRegister         = kPORT_UnLockRegister,
	};

	/*  Sets the port configuration */

	PORT_SetPinConfig(KINETIS_PORT(BOARD_POWER_PORT), BOARD_POWER_PIN_OUT, &power_port_config);

	gpio_pin_config_t power_pin_config = {
		kGPIO_DigitalOutput,
		1,
	};

	/*  Sets the pin configuration */

	GPIO_PinInit(KINETIS_GPIO(BOARD_POWER_PORT), BOARD_POWER_PIN_OUT, &power_pin_config);

	BOARD_POWER_ON(KINETIS_GPIO(BOARD_POWER_PORT), BOARD_POWER_PIN_OUT);
#endif

#if INTERFACE_USB

	// Disable the MPU otherwise USB cannot access the bus

	MPU->CESR = 0;

	/* enable Port pin to sample VBUS */

	CLOCK_EnableClock(KINETIS_CLOCK_PORT(BOARD_PORT_VBUS));

	port_pin_config_t vbus_port_config = {
		.pullSelect           = kPORT_PullDown,
		.slewRate             = kPORT_FastSlewRate,
		.passiveFilterEnable  = kPORT_PassiveFilterDisable,
		.openDrainEnable      = kPORT_OpenDrainDisable,
		.driveStrength        = kPORT_LowDriveStrength,
		.mux                  = kPORT_MuxAsGpio,
		.lockRegister         = kPORT_UnLockRegister,
	};

	/*  Sets the port configuration */

	PORT_SetPinConfig(KINETIS_PORT(BOARD_PORT_VBUS), BOARD_PIN_VBUS, &vbus_port_config);

	gpio_pin_config_t vbus_pin_config = {
		kGPIO_DigitalInput,
		0,
	};

	/*  Sets the pin configuration */

	GPIO_PinInit(KINETIS_GPIO(BOARD_PORT_VBUS), BOARD_PIN_VBUS, &vbus_pin_config);

#endif

#if INTERFACE_USART

	/* configure USART clock */

	CLOCK_EnableClock(KINETIS_CLOCK_UART(BOARD_USART));

	/* configure USART pins */

	CLOCK_EnableClock(KINETIS_CLOCK_PORT(BOARD_PORT_USART));

	port_pin_config_t uart_port_config = {
		.pullSelect           = kPORT_PullDisable,
		.slewRate             = kPORT_FastSlewRate,
		.passiveFilterEnable  = kPORT_PassiveFilterDisable,
		.openDrainEnable      = kPORT_OpenDrainDisable,
		.driveStrength        = kPORT_LowDriveStrength,
		.mux                  = BOARD_PORT_USART_AF,
		.lockRegister         = kPORT_UnLockRegister,
	};

	/*  Sets the port configuration */

	PORT_SetMultiplePinsConfig(KINETIS_PORT(BOARD_PORT_USART), KINETIS_MASK(BOARD_PIN_TX) | KINETIS_MASK(BOARD_PIN_RX),
				   &uart_port_config);

#endif

	/* Initialize LEDs */

	port_pin_config_t led_port_config = {
		.pullSelect           = kPORT_PullDisable,
		.slewRate             = kPORT_FastSlewRate,
		.passiveFilterEnable  = kPORT_PassiveFilterDisable,
		.openDrainEnable      = kPORT_OpenDrainDisable,
		.driveStrength        = kPORT_LowDriveStrength,
		.mux                  = kPORT_MuxAsGpio,
		.lockRegister         = kPORT_UnLockRegister,
	};

	uint32_t leds = 0;
#if defined(BOARD_PIN_LED_ACTIVITY)
	leds |= KINETIS_MASK(BOARD_PIN_LED_ACTIVITY);
#endif

#if defined(BOARD_PIN_LED_BOOTLOADER)
	leds |= KINETIS_MASK(BOARD_PIN_LED_BOOTLOADER);
#endif

	if (leds) {
		CLOCK_EnableClock(KINETIS_CLOCK_PORT(BOARD_PORT_LEDS));

		PORT_SetMultiplePinsConfig(KINETIS_PORT(BOARD_PORT_LEDS), leds, &led_port_config);

		gpio_pin_config_t led_pin_config = {
			kGPIO_DigitalOutput,
			1,
		};

		/*  Sets the pin configuration */

#if defined(BOARD_PIN_LED_ACTIVITY)
		GPIO_PinInit(KINETIS_GPIO(BOARD_PORT_LEDS), BOARD_PIN_LED_ACTIVITY, &led_pin_config);
#endif
#if defined(BOARD_PIN_LED_BOOTLOADER)
		GPIO_PinInit(KINETIS_GPIO(BOARD_PORT_LEDS), BOARD_PIN_LED_BOOTLOADER, &led_pin_config);
#endif
		BOARD_LED_ON(KINETIS_GPIO(BOARD_PORT_LEDS), leds);
	}
}

void
board_deinit(void)
{

	port_pin_config_t unconfigure_port_config = {
		kPORT_PullDisable,
		kPORT_FastSlewRate,
		kPORT_PassiveFilterDisable,
		kPORT_OpenDrainDisable,
		kPORT_LowDriveStrength,
		kPORT_PinDisabledOrAnalog,
		kPORT_UnLockRegister,
	};
	gpio_pin_config_t unconfigure__pin_config = {
		kGPIO_DigitalInput,
		0,
	};

#if defined(BOARD_POWER_PIN_OUT) && defined(BOARD_POWER_PIN_RELEASE)
	/* deinitialize the POWER pin - with the assumption the hold up time of
	 * the voltage being bleed off by an inupt pin impedance will allow
	 * enough time to boot the app
	 */
	GPIO_PinInit(KINETIS_GPIO(BOARD_POWER_PORT), BOARD_POWER_PIN_OUT, &unconfigure__pin_config);
	PORT_SetPinConfig(KINETIS_PORT(BOARD_POWER_PORT), BOARD_POWER_PIN, &unconfigure_port_config);

#endif

#if INTERFACE_USB
	PORT_SetPinConfig(KINETIS_PORT(BOARD_PORT_VBUS), BOARD_PIN_VBUS, &unconfigure_port_config);
#endif

#if INTERFACE_USART
	PORT_SetMultiplePinsConfig(KINETIS_PORT(BOARD_PORT_USART), KINETIS_MASK(BOARD_PIN_TX) | KINETIS_MASK(BOARD_PIN_RX),
				   &unconfigure_port_config);
#endif

	/* deinitialise LEDs */
	uint32_t leds = 0;
#if defined(BOARD_PIN_LED_ACTIVITY)
	leds |= KINETIS_MASK(BOARD_PIN_LED_ACTIVITY);
#endif

#if defined(BOARD_PIN_LED_BOOTLOADER)
	leds |= KINETIS_MASK(BOARD_PIN_LED_BOOTLOADER);
#endif

	if (leds) {
		GPIO_ClearPinsOutput(KINETIS_GPIO(BOARD_PORT_LEDS), leds);

#if defined(BOARD_PIN_LED_ACTIVITY)
		GPIO_PinInit(KINETIS_GPIO(BOARD_PORT_LEDS), BOARD_PIN_LED_ACTIVITY, &unconfigure__pin_config);
#endif
#if defined(BOARD_PIN_LED_BOOTLOADER)
		GPIO_PinInit(KINETIS_GPIO(BOARD_PORT_LEDS), BOARD_PIN_LED_BOOTLOADER, &unconfigure__pin_config);
#endif

		PORT_SetMultiplePinsConfig(KINETIS_PORT(BOARD_PORT_LEDS), leds, &unconfigure_port_config);
	}

	/*  Incase of any over lap un-configure clocks last -*/

#if defined(BOARD_POWER_PIN_OUT) && defined(BOARD_POWER_PIN_RELEASE)
	CLOCK_DisableClock(KINETIS_CLOCK_PORT(BOARD_POWER_PORT));
#endif

#if INTERFACE_USB
	CLOCK_DisableClock(KINETIS_CLOCK_PORT(BOARD_PORT_VBUS));
#endif

#if INTERFACE_USART
	CLOCK_DisableClock(KINETIS_CLOCK_PORT(BOARD_PORT_USART));
	CLOCK_DisableClock(KINETIS_CLOCK_UART(BOARD_USART));
#endif

	if (leds) {
		CLOCK_DisableClock(KINETIS_CLOCK_PORT(BOARD_PORT_LEDS));
	}
}


static void CLOCK_CONFIG_FllStableDelay(void)
{
	uint32_t i = 30000U;

	while (i--) {
		__NOP();
	}
}

void
clock_deinit(void)
{

	const mcg_config_t mcgConfig_BOARD_BootClockHSRUN = {
		.mcgMode = kMCG_ModePBE,                  /* PEE - PLL Engaged External */
		.irclkEnableMode = kMCG_IrclkEnable,      /* MCGIRCLK enabled, MCGIRCLK disabled in STOP mode */
		.ircs = kMCG_IrcSlow,                     /* Slow internal reference clock selected */
		.fcrdiv = 0x1U,                           /* Fast IRC divider: divided by 2 */
		.frdiv = 0x0U,                            /* FLL reference clock divider: divided by 32 */
		.drs = kMCG_DrsLow,                       /* Low frequency range */
		.dmx32 = kMCG_Dmx32Default,               /* DCO has a default range of 25% */
		.oscsel = kMCG_OscselOsc,                 /* Selects System Oscillator (OSCCLK) */
		.pll0Config =
		{
			.enableMode = MCG_PLL_DISABLE,    /* MCGPLLCLK disabled */
			.prdiv = 0x0U,                    /* PLL Reference divider: divided by 1 */
			.vdiv = 0xeU,                     /* VCO divider: multiplied by 30 */
		},
		.pllcs = kMCG_PllClkSelPll0,              /* PLL0 output clock is selected */
	};
	const osc_config_t oscConfig_BOARD_BootClockHSRUN = {
		.freq = 12000000U,                        /* Oscillator frequency: 12000000Hz */
		.capLoad = (OSC_CAP0P),                   /* Oscillator capacity load: 0pF */
		.workMode = kOSC_ModeOscLowPower,         /* Oscillator low power */
		.oscerConfig =
		{
			.enableMode = kOSC_ErClkEnable,   /* Enable external reference clock, disable external reference clock in STOP mode */
			.erclkDiv = 0,                    /* Divider for OSCERCLK: divided by 1 */
		}
	};

	/*******************************************************************************
	 * Code for BOARD_BootClockHSRUN configuration
	 ******************************************************************************/

	/* Set the system clock dividers in SIM to safe value. */
	CLOCK_SetSimSafeDivs();
	/* Initializes OSC0 according to board configuration. */
	CLOCK_InitOsc0(&oscConfig_BOARD_BootClockHSRUN);
	CLOCK_SetXtal0Freq(oscConfig_BOARD_BootClockHSRUN.freq);
	/* Configure the Internal Reference clock (MCGIRCLK). */
	CLOCK_SetInternalRefClkConfig(mcgConfig_BOARD_BootClockHSRUN.irclkEnableMode,
				      mcgConfig_BOARD_BootClockHSRUN.ircs,
				      mcgConfig_BOARD_BootClockHSRUN.fcrdiv);
	/* Set MCG to PEE mode. */
	CLOCK_BootToBlpeMode(mcgConfig_BOARD_BootClockHSRUN.oscsel);

	const mcg_config_t mcgConfig_ClocksFunc_1 = {
		.mcgMode = kMCG_ModeFEI,                  /* FEI - FLL Engaged Internal */
		.irclkEnableMode = MCG_IRCLK_DISABLE,     /* MCGIRCLK disabled */
		.ircs = kMCG_IrcSlow,                     /* Slow internal reference clock selected */
		.fcrdiv = 0x1U,                           /* Fast IRC divider: divided by 2 */
		.frdiv = 0x0U,                            /* FLL reference clock divider: divided by 1 */
		.drs = kMCG_DrsLow,                       /* Low frequency range */
		.dmx32 = kMCG_Dmx32Default,               /* DCO has a default range of 25% */
		.oscsel = kMCG_OscselOsc,                 /* Selects System Oscillator (OSCCLK) */
		.pll0Config =
		{
			.enableMode = MCG_PLL_DISABLE,    /* MCGPLLCLK disabled */
			.prdiv = 0x0U,                    /* PLL Reference divider: divided by 1 */
			.vdiv = 0x0U,                     /* VCO divider: multiplied by 16 */
		},
		.pllcs = kMCG_PllClkSelPll0,              /* PLL0 output clock is selected */
	};
	const sim_clock_config_t simConfig_ClocksFunc_1 = {
		.pllFllSel = SIM_PLLFLLSEL_MCGFLLCLK_CLK, /* PLLFLL select: MCGFLLCLK clock */
		.pllFllDiv = 0,                           /* PLLFLLSEL clock divider divisor: divided by 1 */
		.pllFllFrac = 0,                          /* PLLFLLSEL clock divider fraction: multiplied by 1 */
		.er32kSrc = SIM_OSC32KSEL_OSC32KCLK_CLK,  /* OSC32KSEL select: OSC32KCLK clock */
		.clkdiv1 = 0x110000U,                     /* SIM_CLKDIV1 - OUTDIV1: /1, OUTDIV2: /1, OUTDIV3: /2, OUTDIV4: /2 */
	};

	/* Set MCG to FEI mode. */
#if FSL_CLOCK_DRIVER_VERSION >= MAKE_VERSION(2, 2, 0)
	CLOCK_SetFbeMode(0, mcgConfig_ClocksFunc_1.dmx32,
			 mcgConfig_ClocksFunc_1.drs,
			 CLOCK_CONFIG_FllStableDelay);

	CLOCK_BootToFeiMode(mcgConfig_ClocksFunc_1.dmx32,
			    mcgConfig_ClocksFunc_1.drs,
			    CLOCK_CONFIG_FllStableDelay);
#else
	CLOCK_BootToFeiMode(mcgConfig_ClocksFunc_1.drs,
			    CLOCK_CONFIG_FllStableDelay);
#endif
	/* Set the clock configuration in SIM module. */
	CLOCK_SetSimConfig(&simConfig_ClocksFunc_1);
	/* Set SystemCoreClock variable. */
	SystemCoreClock = BOARD_RESETCLOCKRUN_CORE_CLOCK;
}

void flash_lock(void)
{
}

uint32_t flash_func_sector_size(unsigned sector)
{
	return (sector < BOARD_FLASH_SECTORS) ? FLASH_SECTOR_SIZE : 0;
}

void flash_erase_sector(unsigned sector)
{
	__disable_irq();
	FLASH_Erase(&s_flashDriver, (sector * FLASH_SECTOR_SIZE), FLASH_SECTOR_SIZE, kFLASH_ApiEraseKey);
	__enable_irq();

}

static bool flash_verify_erase(unsigned sector)
{
	/* Calculate the physical address of the sector
	 */
	volatile uint32_t address = APP_LOAD_ADDRESS + (sector - FIRST_FLASH_SECTOR_TO_ERASE) * FLASH_SECTOR_SIZE;
	__disable_irq();
	volatile status_t status = FLASH_VerifyErase(&s_flashDriver, address, FLASH_SECTOR_SIZE, kFLASH_MarginValueNormal);
	__enable_irq();
	return status == kStatus_FLASH_Success;
}

void flash_func_erase_sector(unsigned sector)
{
	if (sector >= BOARD_FLASH_SECTORS || sector < FIRST_FLASH_SECTOR_TO_ERASE) {
		return;
	}

	if (!flash_verify_erase(sector)) {

		/* erase the sector if it failed the blank check */

		flash_erase_sector(sector);
	}
}

static uint32_t words[2] = {0, 0};
static uint32_t second_word = 0xffffffff;
static uint32_t pending = 0;

void
flash_func_write_word(uint32_t address, uint32_t word)
{
	address += APP_LOAD_ADDRESS;

	uint32_t loc = (address & 4) >> 2;
	pending = loc == 0;

	// Cache words
	words[loc] = word;

	/* Program the 64bits. */

	// Time to write first and second word

	if (address == APP_LOAD_ADDRESS && second_word != 0xffffffff) {
		words[1] = second_word;
		loc = 1;
		pending = 0;
		address +=  sizeof(words[1]);
	}

	if (loc == 1) {
		if (address == APP_LOAD_ADDRESS + sizeof(word) && second_word == 0xffffffff) {
			second_word = words[1];
			return;
		}

		__disable_irq();
		FLASH_Program(&s_flashDriver, address - sizeof(words[1]), &words[0], sizeof(words));
		__enable_irq();

	}

}

uint32_t flash_func_read_word(uint32_t address)
{
	if (address & 3) {
		return 0;
	}

	if (address == sizeof(uint32_t) && second_word != 0xffffffff) { return second_word; }

	return (pending) ? words[0] : *(uint32_t *)(address + APP_LOAD_ADDRESS);
}

uint32_t
flash_func_read_otp(uint32_t address)
{
	return 0;
}

uint32_t get_mcu_id(void)
{
	return SIM->SDID;
}

int get_mcu_desc(int max, uint8_t *revstr)
{
	const char dig[] = "0123456789ABCDEF";
	const char none[] = "MK66FN2M0VMD18,0";
	int i;

	for (i = 0; none[i] && i < max - 1; i++) {
		revstr[i] = none[i];
	}

	uint32_t id = (get_mcu_id() & REVID_MASK) >> REVID_SHIFTS;
	revstr[i - 1] = dig[id];
	return i;
}


int check_silicon(void)
{
	return 0;
}

uint32_t
flash_func_read_sn(uint32_t address)
{
	address /= sizeof(address);
	const volatile uint32_t *p = &SIM->UIDH;
	return p[address];
}

void
led_on(unsigned led)
{
	switch (led) {
	case LED_ACTIVITY:
#if defined(BOARD_PIN_LED_ACTIVITY)
		BOARD_LED_ON(KINETIS_GPIO(BOARD_PORT_LEDS), KINETIS_MASK(BOARD_PIN_LED_ACTIVITY));
#endif
		break;

	case LED_BOOTLOADER:
#if defined(BOARD_PIN_LED_BOOTLOADER)
		BOARD_LED_ON(KINETIS_GPIO(BOARD_PORT_LEDS), KINETIS_MASK(BOARD_PIN_LED_BOOTLOADER));
#endif
		break;
	}
}

void
led_off(unsigned led)
{
	switch (led) {
	case LED_ACTIVITY:
#if defined(BOARD_PIN_LED_ACTIVITY)
		BOARD_LED_OFF(KINETIS_GPIO(BOARD_PORT_LEDS), KINETIS_MASK(BOARD_PIN_LED_ACTIVITY));
#endif
		break;

	case LED_BOOTLOADER:
#if defined(BOARD_PIN_LED_BOOTLOADER)
		BOARD_LED_OFF(KINETIS_GPIO(BOARD_PORT_LEDS), KINETIS_MASK(BOARD_PIN_LED_BOOTLOADER));
#endif
		break;
	}
}

void
led_toggle(unsigned led)
{
	switch (led) {
	case LED_ACTIVITY:
#if defined(BOARD_PIN_LED_ACTIVITY)
		GPIO_TogglePinsOutput(KINETIS_GPIO(BOARD_PORT_LEDS), KINETIS_MASK(BOARD_PIN_LED_ACTIVITY));
#endif
		break;

	case LED_BOOTLOADER:
#if defined(BOARD_PIN_LED_BOOTLOADER)
		GPIO_TogglePinsOutput(KINETIS_GPIO(BOARD_PORT_LEDS), KINETIS_MASK(BOARD_PIN_LED_BOOTLOADER));
#endif
		break;
	}
}

int
main(void)
{
	// The Kinetis start up code has initialized Clocks and MPU, FPU

	bool try_boot = true;			/* try booting before we drop to the bootloader */
	unsigned timeout = BOOTLOADER_DELAY;	/* if nonzero, drop out of the bootloader after this time */

#if defined(BOARD_POWER_PIN_OUT)

	/* Here we check for the app setting the POWER_DOWN_RTC_SIGNATURE
	 * in this case, we reset the signature and wait to die
	 */
	if (board_get_rtc_signature() == POWER_DOWN_RTC_SIGNATURE) {
		board_set_rtc_signature(0);

		while (1);
	}

#endif

	// Initialize the RAM based function in the Kinetis Flash Lib (this could be removed with run_from_ram tags
	// and some linker magic.

	s_flashDriver.flashExecuteInRamFunctionInfo = &s_flashExecuteInRamFunctionInfo.activeFunctionCount;
	FLASH_PrepareExecuteInRamFunctions(&s_flashDriver);
	FLASH_Init(&s_flashDriver);

	/* do board-specific initialization */
	board_init();

	/*
	 * Check the force-bootloader register; if we find the signature there, don't
	 * try booting.
	 */
	if (board_get_rtc_signature() == BOOT_RTC_SIGNATURE) {

		/*
		 * Don't even try to boot before dropping to the bootloader.
		 */
		try_boot = false;

		/*
		 * Don't drop out of the bootloader until something has been uploaded.
		 */
		timeout = 0;

		/*
		 * Clear the signature so that if someone resets us while we're
		 * in the bootloader we'll try to boot next time.
		 */
		board_set_rtc_signature(0);
	}

	/*
	 * Check if the force-bootloader pins are strapped; if strapped,
	 * don't try booting.
	 */
	if (board_test_force_pin()) {
		try_boot = false;
	}

#if INTERFACE_USB

	/*
	 * Check for USB connection - if present, don't try to boot, but set a timeout after
	 * which we will fall out of the bootloader.
	 *
	 * If the force-bootloader pins are tied, we will stay here until they are removed and
	 * we then time out.
	 */
#if defined(BOARD_USB_VBUS_SENSE_DISABLED)
	try_boot = false;
#else

	if (GPIO_ReadPinInput(KINETIS_GPIO(BOARD_PORT_VBUS), BOARD_PIN_VBUS) != 0) {

		/* don't try booting before we set up the bootloader */
		try_boot = false;
	}

#endif
#endif

#if INTERFACE_USART

	/*
	 * Check for if the USART port RX line is receiving a break command, or is being held low. If yes,
	 * don't try to boot, but set a timeout after
	 * which we will fall out of the bootloader.
	 *
	 * If the force-bootloader pins are tied, we will stay here until they are removed and
	 * we then time out.
	 */
	if (board_test_usart_receiving_break()) {
		try_boot = false;
	}

#endif

	/* Try to boot the app if we think we should just go straight there */
	if (try_boot) {

		/* set the boot-to-bootloader flag so that if boot fails on reset we will stop here */
#ifdef BOARD_BOOT_FAIL_DETECT
		board_set_rtc_signature(BOOT_RTC_SIGNATURE);
#endif

		/* try to boot immediately */
		jump_to_app();

		// If it failed to boot, reset the boot signature and stay in bootloader
		board_set_rtc_signature(BOOT_RTC_SIGNATURE);

		/* booting failed, stay in the bootloader forever */
		timeout = 0;
	}

	/* start the interface */
#if INTERFACE_USART
	cinit(BOARD_INTERFACE_CONFIG_USART, USART);
#endif
#if INTERFACE_USB
	cinit(BOARD_INTERFACE_CONFIG_USB, USB);
#endif

	while (1) {
		/* run the bootloader, come back after an app is uploaded or we time out */
		bootloader(timeout);

		/* if the force-bootloader pins are strapped, just loop back */
		if (board_test_force_pin()) {
			continue;
		}

#if INTERFACE_USART

		/* if the USART port RX line is still receiving a break, just loop back */
		if (board_test_usart_receiving_break()) {
			continue;
		}

#endif

		/* set the boot-to-bootloader flag so that if boot fails on reset we will stop here */
#ifdef BOARD_BOOT_FAIL_DETECT
		board_set_rtc_signature(BOOT_RTC_SIGNATURE);
#endif

		/* look to see if we can boot the app */
		jump_to_app();

		/* launching the app failed - stay in the bootloader forever */
		timeout = 0;
	}
}

void _start()
{
	main();
}


void SysTick_Handler()
{
	sys_tick_handler();
}

int DbgConsole_Printf(char *fmt_s, ...)
{
	return 0;
}