- Every student must deliver a complete solution.
- It is up to you if you want to fork this repo, or if you prefer to work in a private repo. However, you have to use exactly the same directory structure for the validation procedure to work.
- There will not be a "full" lab grade for this long lab, but there will be one point to gain for the "salami" TE grade (i.e. it is one of the "challenges"). Also, the skills that you will learn during this lab will be necessary for subsequent labs.
- We expect that you will have more issues and questions than with other labs (because we have a left some questions open on purpose). Please ask your questions on telegram or in the forum, so that everyone in the class can benefit from the discussion.
This lab has 4 objectives:
-
The first objective is to design and implement a simple application protocol on top of UDP. It will be very similar to the protocol presented during the lecture (where thermometers were publishing temperature events in a multicast group and where a station was listening for these events).
-
The second objective is to get familiar with several tools from the JavaScript ecosystem. You will implement two simple Node.js applications. You will also have to search for and use a couple of npm modules (i.e. third-party libraries).
-
The third objective is to get familiar with Docker. You will have to create 2 Docker images (they will be very similar to the images presented in the previous lecture). You will then have to run multiple containers based on these images.
-
Last but not least, the fourth objective is to work with a bit less upfront guidance, as compared with previous labs. This time, we do not provide a complete webcast to get you started, because we want you to search for information (this is a very important skill that we will increasingly train). Don't worry, we have prepared a fairly detailed list of tasks that will put you on the right track. If you feel a bit overwhelmed at the beginning, make sure to read this document carefully and to find answers to the questions asked in the tables. You will see that the whole thing will become more and more approachable.
In this lab, you will write 2 small NodeJS applications and package them in Docker images:
-
the first app, Musician, simulates someone who plays an instrument in an orchestra. When the app is started, it is assigned an instrument (piano, flute, etc.). As long as it is running, every second it will emit a sound (well... simulate the emission of a sound: we are talking about a communication protocol). Of course, the sound depends on the instrument.
-
the second app, Auditor, simulates someone who listens to the orchestra. This application has two responsibilities. Firstly, it must listen to Musicians and keep track of active musicians. A musician is active if it has played a sound during the last 5 seconds. Secondly, it must make this information available to you. Concretely, this means that it should implement a very simple TCP-based protocol.
The following table gives you the mapping between instruments and sounds. Please use exactly the same string values in your code, so that validation procedures can work.
| Instrument | Sound |
|---|---|
piano |
ti-ta-ti |
trumpet |
pouet |
flute |
trulu |
violin |
gzi-gzi |
drum |
boum-boum |
- The auditor should include a TCP server and accept connection requests on port 2205.
- After accepting a connection request, the auditor should send a JSON payload containing the list of active musicians, with the following format (it can be a single line, without indentation):
[
{
"uuid" : "aa7d8cb3-a15f-4f06-a0eb-b8feb6244a60",
"instrument" : "piano",
"activeSince" : "2016-04-27T05:20:50.731Z"
},
{
"uuid" : "06dbcbeb-c4c8-49ed-ac2a-cd8716cbf2d3",
"instrument" : "flute",
"activeSince" : "2016-04-27T05:39:03.211Z"
}
]
You should be able to start an Auditor container with the following command:
$ docker run -d -p 2205:2205 res/auditor
You should be able to connect to your Auditor container over TCP and see that there is no active musician.
$ telnet IP_ADDRESS_THAT_DEPENDS_ON_YOUR_SETUP 2205
[]
You should then be able to start a first Musician container with the following command:
$ docker run -d res/musician piano
After this, you should be able to verify two points. Firstly, if you connect to the TCP interface of your Auditor container, you should see that there is now one active musician (you should receive a JSON array with a single element). Secondly, you should be able to use tcpdump to monitor the UDP datagrams generated by the Musician container.
You should then be able to kill the Musician container, wait 10 seconds and connect to the TCP interface of the Auditor container. You should see that there is now no active musician (empty array).
You should then be able to start several Musician containers with the following commands:
$ docker run -d res/musician piano
$ docker run -d res/musician flute
$ docker run -d res/musician flute
$ docker run -d res/musician drum
When you connect to the TCP interface of the Auditor, you should receive an array of musicians that corresponds to your commands. You should also use tcpdump to monitor the UDP trafic in your system.
| # | Topic |
|---|---|
| Question | How can we represent the system in an architecture diagram, which gives information both about the Docker containers, the communication protocols and the commands? |
| Insert your diagram here... | |
| Question | Who is going to send UDP datagrams and when? |
| Enter your response here... | |
| Question | Who is going to listen for UDP datagrams and what should happen when a datagram is received? |
| Enter your response here... | |
| Question | What payload should we put in the UDP datagrams? |
| Enter your response here... | |
| Question | What data structures do we need in the UDP sender and receiver? When will we update these data structures? When will we query these data structures? |
| Enter your response here... |
| # | Topic |
|---|---|
| Question | In a JavaScript program, if we have an object, how can we serialize it in JSON? |
| Enter your response here... | |
| Question | What is npm? |
| Enter your response here... | |
| Question | What is the npm install command and what is the purpose of the --save flag? |
| Enter your response here... | |
| Question | How can we use the https://www.npmjs.com/ web site? |
| Enter your response here... | |
| Question | In JavaScript, how can we generate a UUID compliant with RFC4122? |
| Enter your response here... | |
| Question | In Node.js, how can we execute a function on a periodic basis? |
| Enter your response here... | |
| Question | In Node.js, how can we emit UDP datagrams? |
| Enter your response here... | |
| Question | In Node.js, how can we access the command line arguments? |
| Enter your response here... |
| # | Topic |
|---|---|
| Question | How do we define and build our own Docker image? |
| Enter your response here... | |
| Question | How can we use the ENTRYPOINT statement in our Dockerfile? |
| Enter your response here... | |
| Question | After building our Docker image, how do we use it to run containers? |
| Enter your response here... | |
| Question | How do we get the list of all running containers? |
| Enter your response here... | |
| Question | How do we stop/kill one running container? |
| Enter your response here... | |
| Question | How can we check that our running containers are effectively sending UDP datagrams? |
| Enter your response here... |
| # | Topic |
|---|---|
| Question | With Node.js, how can we listen for UDP datagrams in a multicast group? |
| Enter your response here... | |
| Question | How can we use the Map built-in object introduced in ECMAScript 6 to implement a dictionary? |
| Enter your response here... | |
| Question | How can we use the Moment.js npm module to help us with date manipulations and formatting? |
| Enter your response here... | |
| Question | When and how do we get rid of inactive players? |
| Enter your response here... | |
| Question | How do I implement a simple TCP server in Node.js? |
| Enter your response here... |
| # | Topic |
|---|---|
| Question | How do we validate that the whole system works, once we have built our Docker image? |
| Enter your response here... |
Please be careful to adhere to the specifications in this document, and in particular
- the Docker image names
- the names of instruments and their sounds
- the TCP PORT number
Also, we have prepared two directories, where you should place your two Dockerfile with their dependent files.
Have a look at the validate.sh script located in the top-level directory. This script automates part of the validation process for your implementation (it will gradually be expanded with additional operations and assertions). As soon as you start creating your Docker images (i.e. creating your Dockerfiles), you should try to run it.