meer8: Repairs

system76 · Dec 19, 2023 · 228cc22 · 228cc22
1 parent 110a80d
commit 228cc22
Show file tree

Hide file tree

Showing 13 changed files with 39 additions and 3 deletions.
diff --git a/src/models/meer8/img/25-drive-insertion.webp b/src/models/meer8/img/25-drive-insertion.webp
diff --git a/src/models/meer8/img/25-drive-screws.webp b/src/models/meer8/img/25-drive-screws.webp
diff --git a/src/models/meer8/img/bottom-plugs.webp b/src/models/meer8/img/bottom-plugs.webp
diff --git a/src/models/meer8/img/bottom-screws.webp b/src/models/meer8/img/bottom-screws.webp
diff --git a/src/models/meer8/img/cmos-connector.webp b/src/models/meer8/img/cmos-connector.webp
diff --git a/src/models/meer8/img/expansion-module-external.webp b/src/models/meer8/img/expansion-module-external.webp
diff --git a/src/models/meer8/img/expansion-placeholder.webp b/src/models/meer8/img/expansion-placeholder.webp
diff --git a/src/models/meer8/img/m2-slots.webp b/src/models/meer8/img/m2-slots.webp
diff --git a/src/models/meer8/img/meer8.webp b/src/models/meer8/img/meer8.webp
diff --git a/src/models/meer8/img/ram-slots.webp b/src/models/meer8/img/ram-slots.webp
diff --git a/src/models/meer8/img/sata-port.webp b/src/models/meer8/img/sata-port.webp
diff --git a/src/models/meer8/img/wireless-card.webp b/src/models/meer8/img/wireless-card.webp
diff --git a/src/models/meer8/repairs.md b/src/models/meer8/repairs.md
@@ -51,8 +51,8 @@ If you have the tall model Meerkat with the optional I/O expansion module, it wi
 
 1. Follow the steps above to [remove the bottom panel](#removing-the-bottom-panel).
 2. Unscrew the retainer screw opposite the M.2 slot.
-    - In the photo below, the short model is shown on the left, while the tall model (with the optional I/O expansion module installed) is shown on the right.
-    - The 2280 slot screw is highlighted cyan, while the 2242 slot screw is highlighted red.
+    - The 2280 slot screw is highlighted cyan below, while the 2242 slot screw is highlighted red.
+    - In the tall model, if the optional I/O expansion module is installed, its connector will occupy the 2242 slot (highlighted red).
 
 ![M.2 slot screw](./img/m2-slots.webp)
 
@@ -63,7 +63,7 @@ If you have the tall model Meerkat with the optional I/O expansion module, it wi
 
 ## Replacing the RAM:
 
-The Meerkat 7 supports up to 64GB (2x32GB) of DDR4 SO-DIMMs running at 3200MHz. If you've purchased new RAM, need to replace your RAM, or are reseating your RAM, follow these steps.
+The Meerkat 8 supports up to 64GB (2x32GB) of DDR4 SO-DIMMs running at 3200MHz. If you've purchased new RAM, need to replace your RAM, or are reseating your RAM, follow these steps.
 
 **Tools required:** Cross-head (Phillips) screwdriver  
 **Time estimate:** 5 minutes