Master Config Network
This is the Name of the Tiny Pixel Mapper and also the SSID of the Access point if set to AP mode
This is the Password to connect to the TinyPixelMapper when set to AP mode.
What SSID should the TPM connect to.
The Password of the Client SSID
On = Wifi enabled
Off = wifi power off
If wifi power is off then you can set the TPM back to AP mode with the default password of "love4all" if you HOLD the BUTTON during BOOT
When ethernet is connected wifi is automatically switched off. If its set to DHCP and does not recive an IP it will switch wifi back on.
While booting the TPM will display the Wifi mode with a COLOR FLASH, GREEN = AP-Mode , RED = Client Mode
If enabled a HTTP server is online with a file editor (http://ip/edit) where you can edit all the config files.
Output Debug information on the Serial (USB) port.
Disable if not required uses up CPU
Output debug information over telnet.
Disable if not required uses up CPU
Static = use settings below
DHCP = get the IP from the DHCP server
Enter the Correct IP, Subnet Mast, Default Gateway and DNS server (optional for NTP)
Set your NTP server so that the Clock effect has the right time.