test: check all commands are submitted

codecov.yml

@@ -1,5 +1,4 @@
 ignore:
-  - "src/ansys/mapdl/core/_commands"
   - "src/ansys/mapdl/core/jupyter.py"
   - "src/ansys/mapdl/core/mapdl_console.py"
   - "src/ansys/mapdl/core/mapdl_inprocess.py"

doc/changelog.d/3501.added.md

@@ -0,0 +1 @@
+test: check all commands are submitted

pyproject.toml

@@ -120,7 +120,7 @@ pymapdl_convert_script = "ansys.mapdl.core.cli:old_pymapdl_convert_script_entry_
 pymapdl = "ansys.mapdl.core.cli:main"
 
 [tool.pytest.ini_options]
-addopts = "-ra -vvv --maxfail=10"
+addopts = "-rxXsa -vvv --maxfail=10"
 junit_family = "legacy"
 filterwarnings = [
     "ignore::FutureWarning",

src/ansys/mapdl/core/_commands/apdl/parameter_definition.py

@@ -336,7 +336,7 @@ def get(
         command = f"*GET,{par},{entity},{entnum},{item1},{it1num},{item2},{it2num}"
         return self.run(command, **kwargs)
 
-    def inquire(self, strarray="", func="", arg1="", arg2=""):
+    def inquire(self, strarray="", func="", arg1="", arg2="", **kwargs):
         """Returns system information.
 
         By default, with no arguments, it returns the working directory.
@@ -489,7 +489,7 @@ def inquire(self, strarray="", func="", arg1="", arg2=""):
         >>> mapdl.inquire('', 'RSTFILE')
         'file.rst'
         """
-        return self.run(f"/INQUIRE,{strarray},{func},{arg1},{arg2}")
+        return self.run(f"/INQUIRE,{strarray},{func},{arg1},{arg2}", **kwargs)
 
     def parres(self, lab="", fname="", ext="", **kwargs):
         """Reads parameters from a file.

src/ansys/mapdl/core/_commands/database/components.py

@@ -495,185 +495,35 @@ def cmsel(
 
     def cmwrite(
         self,
-        option: str = "",
         fname: str = "",
         ext: str = "",
-        fnamei: str = "",
-        exti: str = "",
         fmat: str = "",
         **kwargs: Dict[Any, Any],
-    ) -> None:
+    ) -> str:
         """Writes node and element components and assemblies to a file.
 
         APDL Command: CMWRITE
 
         Parameters
         ----------
-        option
-            Selects which data to write:
+        Fname
+            File name and directory path (248 characters maximum, including the
+            characters needed for the directory path). An unspecified directory
+            path defaults to the working directory; in this case, you can use
+            all 248 characters for the file name.
+            The file name defaults to ``Jobname``.
+        Ext
+            Filename extension (eight-character maximum).
+            The extension defaults to ``CM`` if ``fname`` is blank.
 
-            ALL
-                Write all appropriate geometry, material property,
-                load, and component data (default). Two files will
-                be produced. ``Fname.Ext`` will contain all data items
-                mentioned in "Notes", except the solid model
-                data. Fnamei.Exti will contain the solid model
-                geometry and solid model loads data in the form of
-                IGES commands. This option is not valid when
-                CDOPT,ANF is active.
-
-            COMB
-                Write all data mentioned, but to a single file,
-                ``Fname.Ext``. Solid model geometry data will be
-                written in either IGES or ANF format as specified
-                in the CDOPT command, followed by the remainder of
-                the data in the form of ANSYS commands. More
-                information on these (IGES/ANF) file formats is
-                provided in "Notes".
-
-            DB
-                Write all database information except the solid model
-                and solid model loads to ``Fname.Ext`` in the form of
-                ANSYS commands. This option is not valid when
-                CDOPT,ANF is active.
-
-            SOLID
-                Write only the solid model geometry and solid
-                model load data. This output will be in IGES or
-                ANF format, as specified in the CDOPT
-                command. More information on these (IGES/ANF) file
-                formats is provided in "Notes".
-
-            GEOM
-                Write only element and nodal geometry data. Neither
-                solid model geometry nor element attribute data
-                will be written. One file, ``Fname.Ext``, will be
-                produced. Use CDREAD,DB to read in a file written
-                with this option. Element types [ET] compatible
-                with the connectivity of the elements on the file
-                must first be defined before reading the file in
-                with CDREAD,DB.
-
-            CM
-                Write only node and element component and geometry
-                data to ``Fname.Ext``.
-
-            MAT
-                Write only material property data (both linear and
-                nonlinear) to ``Fname.Ext`` .
-
-            LOAD
-                Write only loads for current load step to
-                ``Fname.Ext``.
-
-            SECT
-                Write only section data to ``Fname.Ext``. Pretension
-                sections are not included.
-
-
-        fname
-            File name and directory path (248 characters maximum,
-            including the characters needed for the directory path).
-            An unspecified directory path defaults to the working
-            directory; in this case, you can use all 248 characters
-            for the file name.
-
-        ext
-            Filename extension (eight-character maximum).  The
-            extension defaults to CDB if Fname is blank.
-
-        fnamei
-            Name of the IGES file and its directory path (248
-            characters maximum, including directory). If you do not
-            specify a directory path, it will default to your working
-            directory and you can use all 248 characters for the file
-            name.
-
-            The file name defaults to Fname. Used only if
-            Option = ALL or SOLID. Previous data on this file, if any,
-            is overwritten.
-
-        Exti
-            Filename extension (eight-character maximum).  The
-            extension defaults to IGES in all cases, except when
-            CDOPT,ANF is active and CDWRITE, Option = SOLID. In this
-            case Exti = ANF.
-
-        fmat
-            Format of the output file (defaults to BLOCKED).
-
-            BLOCKED
-                Blocked format. This format allows faster
-                reading of the output file. The time savings is
-                most significant when BLOCKED is used to read
-                .cdb files associated with very large models.
-
-            UNBLOCKED
-                Unblocked format.
+        Fmat
+            Format of the output file (defaults to ``BLOCKED``).
+
+            * ``BLOCKED``: Blocked format. This format allows faster
+              reading of the file.
+
+            * ``UNBLOCKED``: Unblocked format.
 
-        Notes
-        -----
-        Load data includes the current load step only. Loads applied
-        to the solid model (if any) are automatically transferred to
-        the finite element model when this command is issued. ``CDWRITE``
-        writes out solid model loads for meshed models only. If the
-        model is not meshed, the solid model loads cannot be
-        saved. Component data include component definitions, but not
-        assembly definitions. Appropriate ``NUMOFF`` commands are included
-        at the beginning of the file; this is to avoid overlap of an
-        existing database when the file is read in.
-
-        Solution control commands are typically not written to the
-        file unless you specifically change a default solution
-        setting.
-
-        ``CDWRITE`` does not support the ``GSBDATA`` and ``GSGDATA`` commands, and
-        these commands are not written to the file.
-
-        The data may be reread (on a different machine, for example)
-        with the ``CDREAD`` command. Caution: When the file is read in,
-        the ``NUMOFF,MAT`` command may cause a mismatch between material
-        definitions and material numbers referenced by certain loads
-        and element real constants. See ``NUMOFF`` for details. Also, be
-        aware that the files created by the ``CDWRITE`` command explicitly
-        set the active coordinate system to Cartesian (CSYS,0).
-
-        You should generally use the blocked format (Fmat = BLOCKED)
-        when writing out model data with ``CDWRITE``. This is a compressed
-        data format that greatly reduces the time required to read
-        large models through the CDREAD command. The blocked and
-        unblocked formats are described in Chapter 3 of the Guide to
-        Interfacing with ANSYS.
-
-        If you use ``CDWRITE`` in any of the derived products (ANSYS
-        Mechanical Pro, ANSYS Mechanical Premium), then before reading
-        the file, you must edit the Jobname.cdb file to remove
-        commands that are not available in the respective component
-        product.
-
-        The ``CDWRITE`` command writes PART information for any ANSYS
-        LS-DYNA input file to the Jobname.cdb file via the EDPREAD
-        command. (EDPREAD is not a documented command; it is written
-        only when the ``CDWRITE`` command is issued.) The PART information
-        can be automatically read in via the CDREAD command; however,
-        if more than one Jobname.cdb file is read, the PART list from
-        the last Jobname.cdb file overwrites the existing PART list of
-        the total model. This behavior affects all PART-related
-        commands contained in the Jobname.cdb file. You can join
-        models, but not PART-related inputs, which you must modify
-        using the newly-created PART numbers. In limited cases, an
-        update of the PART list (EDWRITE,PUPDATE) is possible; doing
-        so requires that no used combination of MAT/TYPE/REAL appears
-        more than once in the list.
-
-        The ``CDWRITE`` command does not support (for beam meshing) any
-        line operation that relies on solid model associativity. For
-        example, meshing the areas adjacent to the meshed line,
-        plotting the line that contains the orientation nodes, or
-        clearing the mesh from the line that contains orientation
-        nodes may not work as expected. For more information about
-        beam meshing, see Meshing Your Solid Model in the Modeling and
-        Meshing Guide.
         """
-        command = f"CDWRITE,{option},{fname},{ext},,{fnamei},{exti},{fmat}"
+        command = f"CMWRITE,{fname},{ext},,,{fmat}"
         return self.run(command, **kwargs)

src/ansys/mapdl/core/_commands/parse.py

@@ -39,14 +39,14 @@
 NUM_PATTERN = re.compile(NUMERIC_CONST_PATTERN, re.VERBOSE)
 
 
-def parse_kdist(msg):
+def parse_kdist(msg: Optional[str] = None) -> Optional[int]:
     """Parse the keypoint value from a keypoint message"""
     finds = re.findall(NUM_PATTERN, msg)[-4:]
     if len(finds) == 4:
         return [float(val) for val in finds]
 
 
-def parse_et(msg: Optional[str]) -> Optional[int]:
+def parse_et(msg: Optional[str] = None) -> Optional[int]:
     """Parse local element type number definition message
     and return element type number.
     """
@@ -56,23 +56,35 @@ def parse_et(msg: Optional[str]) -> Optional[int]:
             return int(res.group(2))
 
 
-def parse_e(msg: Optional[str]) -> Optional[int]:
+def parse_e(msg: Optional[str] = None) -> Optional[int]:
     """Parse create element message and return element number."""
     if msg:
         res = re.search(r"(ELEMENT\s*)([0-9]+)", msg)
         if res is not None:
             return int(res.group(2))
 
 
-def parse_kpoint(msg):
+def parse_k(msg: Optional[str] = None) -> Optional[int]:
+    """Parse output from ``K`` command"""
+    if msg:
+        if not re.search(r"KEYPOINT NUMBER", msg):
+            res = re.search(r"(KEYPOINT\s*)([0-9]+)", msg)
+        else:
+            res = re.search(r"(KEYPOINT NUMBER =\s*)([0-9]+)", msg)
+
+        if res:
+            return int(res.group(2))
+
+
+def parse_kpoint(msg: Optional[str] = None) -> Optional[int]:
     """Parse create keypoint message and return keypoint number."""
     if msg:
         res = re.search(r"kpoint=\s+(\d+)\s+", msg)
         if res is not None:
             return int(res.group(1))
 
 
-def parse_output_areas(msg):
+def parse_output_areas(msg: Optional[str] = None) -> Optional[int]:
     """Parse create area message and return area number."""
     if msg:
         res = re.search(r"(OUTPUT AREAS =\s*)([0-9]+)", msg)
@@ -83,47 +95,71 @@ def parse_output_areas(msg):
             return int(res.group(2))
 
 
-def parse_a(msg):
+def parse_a(msg: Optional[str] = None) -> Optional[int]:
     """Parse create area message and return area number."""
     if msg:
         res = re.search(r"(AREA NUMBER =\s*)([0-9]+)", msg)
         if res is not None:
             return int(res.group(2))
 
 
-def parse_line_no(msg):
+def parse_line_no(msg: Optional[str] = None) -> Optional[int]:
     """Parse create line message and return line number."""
     if msg:
         res = re.search(r"LINE NO[.]=\s+(\d+)", msg)
         if res is not None:
             return int(res.group(1))
 
 
-def parse_line_nos(msg):
+def parse_line_nos(msg: Optional[str] = None) -> Optional[int]:
     if msg:
         matches = re.findall(r"LINE NO[.]=\s*(\d*)", msg)
         if matches:
             return [int(match) for match in matches]
 
 
-def parse_v(msg):
+def parse_v(msg: Optional[str] = None) -> Optional[int]:
     """Parse volume message and return volume number"""
     if msg:
         res = re.search(r"(VOLUME NUMBER =\s*)([0-9]+)", msg)
         if res is not None:
             return int(res.group(2))
 
 
-def parse_output_volume_area(msg):
+def parse_output_volume_area(msg: Optional[str] = None) -> Optional[int]:
     """Parse create area message and return area or volume number"""
     if msg:
         res = re.search(r"OUTPUT (AREA|VOLUME|AREAS) =\s*([0-9]+)", msg)
         if res is not None:
             return int(res.group(2))
 
 
-def parse_ndist(msg):
+def parse_n(msg: Optional[str] = None) -> Optional[int]:
+    """Parse output of ``N``"""
+    if msg:
+        res = re.search(r"(NODE\s*)([0-9]+)", msg)
+        if res is not None:
+            return int(res.group(2))
+
+
+def parse_ndist(msg: Optional[str] = None) -> Optional[int]:
     """Parse the node value from a node message"""
     finds = re.findall(NUM_PATTERN, msg)[-4:]
     if len(finds) == 4:
         return [float(val) for val in finds]
+
+
+def parse_kl(msg: Optional[str] = None) -> Optional[int]:
+    """Parse the output of ``KL``."""
+    if msg:
+        res = re.search(r"KEYPOINT\s+(\d+)\s+", msg)
+        if res is not None:
+            return int(res.group(1))
+
+
+def parse_knode(msg: Optional[str] = None) -> Optional[int]:
+    """Parse the output of ``KNODE``."""
+    if msg:
+        res = re.search(r"KEYPOINT NUMBER =\s+(\d+)", msg)
+        if res is not None:
+            return int(res.group(1))

src/ansys/mapdl/core/_commands/post1_/special.py

@@ -1911,7 +1911,7 @@ def prcamp(
         Distributed ANSYS Restriction: This command is not supported in
         Distributed ANSYS.
         """
-        command = f"PRCAMP,{option},{slope},{unit},{freqb},{cname},{stabval},{keyallfreq},{keynegfreq}"
+        command = f"PRCAMP,{option},{slope},{unit},{freqb},{cname},{stabval},{keyallfreq},{keynegfreq},{keywhirl}"
         return self.run(command, **kwargs)
 
     def prfar(