-
Notifications
You must be signed in to change notification settings - Fork 43
android adb
cheyiliu edited this page Nov 21, 2014
·
14 revisions
#adb logcat
adb logcat -s test
等价于
adb logcat -s test:V
等价于
adb logcat *:S test:V
等价于
adb logcat *:S test
adb logcat -s test | grep grep -E "EXCEPTION|keyword2|keyword3"
(这里仅能显示含有关键字的每一行)
adb logcat -s test | grep -i "EXCEPTION" -B 5 -A 15
adb logcat *:W
adb shell am startservice --user 0 com.ccdt.clingupnp.dmr/com.ccdt.clingupnp.dmr.service.dlnashare.UPnPService
adb shell am start --user 0 com.ccdt.clingupnp.dmr/com.ccdt.clingupnp.dmr.service.dlnashare.UPnPActivity
adb shell am start --user 0 com.pplive.androidtv/com.pplive.androidtv.FirstActivity
adb shell am start -n com.pplive.androidtv/com.pplive.androidtv.FirstActivity
see https://github.com/cheyiliu/Catlog
Usage: logcat [options] [filterspecs]
options include:
-s Set default filter to silent.
Like specifying filterspec '*:s'
-f <filename> Log to file. Default to stdout
-r [<kbytes>] Rotate log every kbytes. (16 if unspecified). Requires -f
-n <count> Sets max number of rotated logs to <count>, default 4
-v <format> Sets the log print format, where <format> is one of:
brief process tag thread raw time threadtime long
-c clear (flush) the entire log and exit
-d dump the log and then exit (don't block)
-t <count> print only the most recent <count> lines (implies -d)
-g get the size of the log's ring buffer and exit
-b <buffer> Request alternate ring buffer, 'main', 'system', 'radio'
or 'events'. Multiple -b parameters are allowed and the
results are interleaved. The default is -b main -b system.
-B output the log in binary
filterspecs are a series of
<tag>[:priority]
where <tag> is a log component tag (or * for all) and priority is:
V Verbose
D Debug
I Info
W Warn
E Error
F Fatal
S Silent (supress all output)
'*' means '*:d' and <tag> by itself means <tag>:v
If not specified on the commandline, filterspec is set from ANDROID_LOG_TAGS.
If no filterspec is found, filter defaults to '*:I'
If not specified with -v, format is set from ANDROID_PRINTF_LOG
or defaults to "brief"
ndroid Debug Bridge version 1.0.31
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <specific device> - directs command to the device or emulator with the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
('--algo', '--key', and '--iv' mean the file is encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
root@android:/ # am
usage: am [subcommand] [options]
usage: am start [-D] [-W] [-P <FILE>] [--start-profiler <FILE>]
[--R COUNT] [-S] [--opengl-trace]
[--user <USER_ID> | current] <INTENT>
am startservice [--user <USER_ID> | current] <INTENT>
am force-stop [--user <USER_ID> | all | current] <PACKAGE>
am kill [--user <USER_ID> | all | current] <PACKAGE>
am kill-all
am broadcast [--user <USER_ID> | all | current] <INTENT>
am instrument [-r] [-e <NAME> <VALUE>] [-p <FILE>] [-w]
[--user <USER_ID> | current]
[--no-window-animation] <COMPONENT>
am profile start [--user <USER_ID> current] <PROCESS> <FILE>
am profile stop [--user <USER_ID> current] [<PROCESS>]
am dumpheap [--user <USER_ID> current] [-n] <PROCESS> <FILE>
am set-debug-app [-w] [--persistent] <PACKAGE>
am clear-debug-app
am monitor [--gdb <port>]
am screen-compat [on|off] <PACKAGE>
am display-size [reset|WxH]
am display-density [reset|DENSITY]
am to-uri [INTENT]
am to-intent-uri [INTENT]
am switch-user <USER_ID>
am stop-user <USER_ID>
am start: start an Activity. Options are:
-D: enable debugging
-W: wait for launch to complete
--start-profiler <FILE>: start profiler and send results to <FILE>
-P <FILE>: like above, but profiling stops when app goes idle
-R: repeat the activity launch <COUNT> times. Prior to each repeat,
the top activity will be finished.
-S: force stop the target app before starting the activity
--opengl-trace: enable tracing of OpenGL functions
--user <USER_ID> | current: Specify which user to run as; if not
specified then run as the current user.
am startservice: start a Service. Options are:
--user <USER_ID> | current: Specify which user to run as; if not
specified then run as the current user.
am force-stop: force stop everything associated with <PACKAGE>.
--user <USER_ID> | all | current: Specify user to force stop;
all users if not specified.
am kill: Kill all processes associated with <PACKAGE>. Only kills.
processes that are safe to kill -- that is, will not impact the user
experience.
--user <USER_ID> | all | current: Specify user whose processes to kill;
all users if not specified.
am kill-all: Kill all background processes.
am broadcast: send a broadcast Intent. Options are:
--user <USER_ID> | all | current: Specify which user to send to; if not
specified then send to all users.
am instrument: start an Instrumentation. Typically this target <COMPONENT>
is the form <TEST_PACKAGE>/<RUNNER_CLASS>. Options are:
-r: print raw results (otherwise decode REPORT_KEY_STREAMRESULT). Use with
[-e perf true] to generate raw output for performance measurements.
-e <NAME> <VALUE>: set argument <NAME> to <VALUE>. For test runners a
common form is [-e <testrunner_flag> <value>[,<value>...]].
-p <FILE>: write profiling data to <FILE>
-w: wait for instrumentation to finish before returning. Required for
test runners.
--user <USER_ID> | current: Specify user instrumentation runs in;
current user if not specified.
--no-window-animation: turn off window animations will running.
am profile: start and stop profiler on a process. The given <PROCESS> argument
may be either a process name or pid. Options are:
--user <USER_ID> | current: When supplying a process name,
specify user of process to profile; uses current user if not specified.
am dumpheap: dump the heap of a process. The given <PROCESS> argument may
be either a process name or pid. Options are:
-n: dump native heap instead of managed heap
--user <USER_ID> | current: When supplying a process name,
specify user of process to dump; uses current user if not specified.
am set-debug-app: set application <PACKAGE> to debug. Options are:
-w: wait for debugger when application starts
--persistent: retain this value
am clear-debug-app: clear the previously set-debug-app.
am bug-report: request bug report generation; will launch UI
when done to select where it should be delivered.
am monitor: start monitoring for crashes or ANRs.
--gdb: start gdbserv on the given port at crash/ANR
am screen-compat: control screen compatibility mode of <PACKAGE>.
am display-size: override display size.
am display-density: override display density.
am to-uri: print the given Intent specification as a URI.
am to-intent-uri: print the given Intent specification as an intent: URI.
am switch-user: switch to put USER_ID in the foreground, starting
execution of that user if it is currently stopped.
am stop-user: stop execution of USER_ID, not allowing it to run any
code until a later explicit switch to it.
<INTENT> specifications include these flags and arguments:
[-a <ACTION>] [-d <DATA_URI>] [-t <MIME_TYPE>]
[-c <CATEGORY> [-c <CATEGORY>] ...]
[-e|--es <EXTRA_KEY> <EXTRA_STRING_VALUE> ...]
[--esn <EXTRA_KEY> ...]
[--ez <EXTRA_KEY> <EXTRA_BOOLEAN_VALUE> ...]
[--ei <EXTRA_KEY> <EXTRA_INT_VALUE> ...]
[--el <EXTRA_KEY> <EXTRA_LONG_VALUE> ...]
[--ef <EXTRA_KEY> <EXTRA_FLOAT_VALUE> ...]
[--eu <EXTRA_KEY> <EXTRA_URI_VALUE> ...]
[--ecn <EXTRA_KEY> <EXTRA_COMPONENT_NAME_VALUE>]
[--eia <EXTRA_KEY> <EXTRA_INT_VALUE>[,<EXTRA_INT_VALUE...]]
[--ela <EXTRA_KEY> <EXTRA_LONG_VALUE>[,<EXTRA_LONG_VALUE...]]
[--efa <EXTRA_KEY> <EXTRA_FLOAT_VALUE>[,<EXTRA_FLOAT_VALUE...]]
[-n <COMPONENT>] [-f <FLAGS>]
[--grant-read-uri-permission] [--grant-write-uri-permission]
[--debug-log-resolution] [--exclude-stopped-packages]
[--include-stopped-packages]
[--activity-brought-to-front] [--activity-clear-top]
[--activity-clear-when-task-reset] [--activity-exclude-from-recents]
[--activity-launched-from-history] [--activity-multiple-task]
[--activity-no-animation] [--activity-no-history]
[--activity-no-user-action] [--activity-previous-is-top]
[--activity-reorder-to-front] [--activity-reset-task-if-needed]
[--activity-single-top] [--activity-clear-task]
[--activity-task-on-home]
[--receiver-registered-only] [--receiver-replace-pending]
[--selector]
[<URI> | <PACKAGE> | <COMPONENT>]
root@android:/ # am
Just build something.